File Content: SNMP-PROXY-MIB.txt SNMP-PROXY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, snmpModules FROM SNMPv2-SMI RowStatus, StorageType FROM SNMPv2-TC SnmpEngineID, SnmpAdminString FROM SNMP-FRAMEWORK-MIB SnmpTagValue FROM SNMP-TARGET-MIB MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; snmpProxyMIB MODULE-IDENTITY LAST-UPDATED "200210140000Z" ORGANIZATION "IETF SNMPv3 Working Group" CONTACT-INFO "WG-email: snmpv3@lists.tislabs.com Subscribe: majordomo@lists.tislabs.com In message body: subscribe snmpv3 Co-Chair: Russ Mundy Network Associates Laboratories Postal: 15204 Omega Drive, Suite 300 Rockville, MD 20850-4601 USA EMail: mundy@tislabs.com Phone: +1 301-947-7107 Co-Chair: David Harrington Enterasys Networks Postal: 35 Industrial Way P. O. Box 5004 Rochester, New Hampshire 03866-5005 USA EMail: dbh@enterasys.com Phone: +1 603-337-2614 Co-editor: David B. Levi Nortel Networks Postal: 3505 Kesterwood Drive Knoxville, Tennessee 37918 EMail: dlevi@nortelnetworks.com Phone: +1 865 686 0432 Co-editor: Paul Meyer Secure Computing Corporation Postal: 2675 Long Lake Road Roseville, Minnesota 55113 EMail: paul_meyer@securecomputing.com Phone: +1 651 628 1592 Co-editor: Bob Stewart Retired" DESCRIPTION "This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by a proxy forwarding application. Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3413; see the RFC itself for full legal notices. " REVISION "200210140000Z" -- 14 October 2002 DESCRIPTION "Clarifications, published as RFC 3413." REVISION "199808040000Z" -- 4 August 1998 DESCRIPTION "Clarifications, published as RFC 2573." REVISION "199707140000Z" -- 14 July 1997 DESCRIPTION "The initial revision, published as RFC2273." ::= { snmpModules 14 } snmpProxyObjects OBJECT IDENTIFIER ::= { snmpProxyMIB 1 } snmpProxyConformance OBJECT IDENTIFIER ::= { snmpProxyMIB 3 } -- -- -- The snmpProxyObjects group -- -- snmpProxyTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpProxyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of translation parameters used by proxy forwarder applications for forwarding SNMP messages." ::= { snmpProxyObjects 2 } snmpProxyEntry OBJECT-TYPE SYNTAX SnmpProxyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of translation parameters used by a proxy forwarder application for forwarding SNMP messages. Entries in the snmpProxyTable are created and deleted using the snmpProxyRowStatus object." INDEX { IMPLIED snmpProxyName } ::= { snmpProxyTable 1 } SnmpProxyEntry ::= SEQUENCE { snmpProxyName SnmpAdminString, snmpProxyType INTEGER, snmpProxyContextEngineID SnmpEngineID, snmpProxyContextName SnmpAdminString, snmpProxyTargetParamsIn SnmpAdminString, snmpProxySingleTargetOut SnmpAdminString, snmpProxyMultipleTargetOut SnmpTagValue, snmpProxyStorageType StorageType, snmpProxyRowStatus RowStatus } snmpProxyName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The locally arbitrary, but unique identifier associated with this snmpProxyEntry." ::= { snmpProxyEntry 1 } snmpProxyType OBJECT-TYPE SYNTAX INTEGER { read(1), write(2), trap(3), inform(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of message that may be forwarded using the translation parameters defined by this entry." ::= { snmpProxyEntry 2 } snmpProxyContextEngineID OBJECT-TYPE SYNTAX SnmpEngineID MAX-ACCESS read-create STATUS current DESCRIPTION "The contextEngineID contained in messages that may be forwarded using the translation parameters defined by this entry." ::= { snmpProxyEntry 3 } snmpProxyContextName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The contextName contained in messages that may be forwarded using the translation parameters defined by this entry. This object is optional, and if not supported, the contextName contained in a message is ignored when selecting an entry in the snmpProxyTable." ::= { snmpProxyEntry 4 } snmpProxyTargetParamsIn OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object selects an entry in the snmpTargetParamsTable. The selected entry is used to determine which row of the snmpProxyTable to use for forwarding received messages." ::= { snmpProxyEntry 5 } snmpProxySingleTargetOut OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "This object selects a management target defined in the snmpTargetAddrTable (in the SNMP-TARGET-MIB). The selected target is defined by an entry in the snmpTargetAddrTable whose index value (snmpTargetAddrName) is equal to this object. This object is only used when selection of a single target is required (i.e. when forwarding an incoming read or write request)." ::= { snmpProxyEntry 6 } snmpProxyMultipleTargetOut OBJECT-TYPE SYNTAX SnmpTagValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object selects a set of management targets defined in the snmpTargetAddrTable (in the SNMP-TARGET-MIB). This object is only used when selection of multiple targets is required (i.e. when forwarding an incoming notification)." ::= { snmpProxyEntry 7 } snmpProxyStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type of this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row." DEFVAL { nonVolatile } ::= { snmpProxyEntry 8 } snmpProxyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). The following objects may not be modified while the value of this object is active(1): - snmpProxyType - snmpProxyContextEngineID - snmpProxyContextName - snmpProxyTargetParamsIn - snmpProxySingleTargetOut - snmpProxyMultipleTargetOut" ::= { snmpProxyEntry 9 } -- -- -- Conformance information -- -- snmpProxyCompliances OBJECT IDENTIFIER ::= { snmpProxyConformance 1 } snmpProxyGroups OBJECT IDENTIFIER ::= { snmpProxyConformance 2 } -- -- -- Compliance statements -- -- snmpProxyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which include a proxy forwarding application." MODULE SNMP-TARGET-MIB MANDATORY-GROUPS { snmpTargetBasicGroup, snmpTargetResponseGroup } MODULE -- This Module MANDATORY-GROUPS { snmpProxyGroup } ::= { snmpProxyCompliances 1 } snmpProxyGroup OBJECT-GROUP OBJECTS { snmpProxyType, snmpProxyContextEngineID, snmpProxyContextName, snmpProxyTargetParamsIn, snmpProxySingleTargetOut, snmpProxyMultipleTargetOut, snmpProxyStorageType, snmpProxyRowStatus } STATUS current DESCRIPTION "A collection of objects providing remote configuration of management target translation parameters for use by proxy forwarder applications." ::= { snmpProxyGroups 3 } END Submit